Ferrari GTC 4 Lusso, Roadside Assistance Manual

Page: 42 / 45

42
Towing the vehicle
B
Emergency release of the electric parking brake (EPB)
Warning
The release procedure must only be carried out by specialised workshop
technicians.
If the system cannot be released, contact the nearest Ferrari Service
Centre.
Warning
When the electric parking brake is deactivated manually, the vehicle
may move. To keep the vehicle stationary, the Park Lock safety device
must be applied: make sure that the letter “P” appears on the gearbox
display.
C
A
B
If the vehicle needs to be moved but the electric parking brake cannot be
deactivated because the battery is flat or there is a failure in the electrical
system that controls it, the emergency release procedure described below
must be performed.
●
Take wrench A for EPB emergency release out of the tool bag.
Warning
Wrench A may only be used by specialised workshop technicians, as
indicated on label C on the tool kit.
●
Using the special rectangular slot B on the LH side of the tool kit
(indicated by a label), place the wrench in the EPB release housing
(in the lower part of the slot, as shown in the figure) and turn it
clockwise: this loosens the parking brake cables.
Important note
To release the brake completely, the wrench needs to be turned 50 times
and it starts to be released after approximately 20 turns.