Ferrari GTC 4 Lusso, Roadside Assistance Manual

Page: 21 / 45

2
Moving the vehicle
21
Driving the vehicle
Running-in
The latest manufacturing techniques have allowed us to achieve high
precision and accuracy levels in the construction and assembly of
components. Nonetheless, the vehicle movable parts undergo a settling
process, basically during the first hours of operation.
Engine and transmission
Avoid exceeding 5,000 RPM for the first 1,000 km.
After starting, do not exceed 4,000 RPM until the engine has warmed up
(oil temperature: 65-70
°
C).
Do not let the engine run at a constantly high speed for a prolonged time.
Warning
BEFORE YOU DRIVE
Check that the seat belts are fastened
Check that the doors are closed
Check that the seat is properly adjusted
Check the rear-view mirror adjustment (central and sides).
Before a trip
Preliminary checks
Check the following at regular intervals and always before long trips:
●
tyre pressure and condition
●
levels of fluids and lubricants
●
condition of windscreen wiper blades
●
proper functioning of the warning lights and external lights.
Important note
In any case, it is advisable to perform these checks at least every 1000
km and always comply with the maintenance schedule.
It is also advisable to:
●
clean the glass covers of the external lights and all the glass surfaces
●
properly adjust the mirrors, steering wheel, seats and seat belts.
Refilling
Warning
Use unleaded fuel only!
Using leaded fuel would permanently damage the catalytic converters.
For specifications and quantities of lubricants and fluids, observe the
information in the "Refilling" table.
Starting and driving the vehicle
System start-up
When the instrument panel is activated (KEY-ON) both the TFT displays
on the instrument panel are activated and system diagnosis is performed.
During diagnosis, which lasts 5 seconds, a check is performed on the
warning lights on the panel and the presence of any faults is checked.
If diagnosis detects any errors, they are only displayed once the 5
seconds required for the check have elapsed. The cases listed below are
an exception and errors are displayed as soon as the key is turned to on,
even during diagnosis:
●
Low engine oil pressure
●
Inertia switch triggered