manualshive.com logo in svg

Ferno KED Pro, User Manual

Share
Download
Ferno KED Pro User Manual Download Page 6

6

© Ferno-Washington, Inc   234-3396-00   January 2011

KED® Pro

3 - aboUT ThE KED® Pro

3.1 Description

The KED

®

 Pro is an emergency patient-handling device 

designed to aid in the immobilization, short transfer 

movement, and technical rescue of patients with suspected 

spinal/cervical injuries. (Technical rescue requires additional 

equipment and specialized training. See 

Operator Skills and 

Training, 

page 5).

The KED

®

 Pro is for professional use by a minimum of 

two trained operators. Additional help may be preferred or 

needed.

FEaTUrEs

● 

Color-coded, sewn-in securing straps

● 

Wraparound head flaps

● 

Wraparound torso flaps

● 

Shoulder strap

● 

Take-down strap (2)

● 

Head/chin strap (2)

● 

Leg straps (2) with removable padding

● 

Modular filler pads (1 large, 2 small)

● 

Integrated carrying handles

● 

Carrying case with integrated backpack

● 

X-ray translucent (except metal buckles)

● 

Rated  for  vertical  and  confined-space  rescue 

(specialized training required)

 

Warning

improper use of the KED® Pro can cause injury. Use 

the KED® Pro only for the purpose described in this 

manual.

About the KED® Pro

3.2  general specifications

Length

Opened, flat 

830 mm/ 33 in.

Rolled, in case 

840 mm/33 in.

Width

Opened, flat 

820 mm/32 in.

Rolled, in case 

245 mm/10 in.

Thickness

Opened, flat 

35 mm/less than 1.5 in.

Rolled, in case 

200 mm/8 in.

Weight* 

4.5 kg/10 lbs.

Load Limit 

250 kg/550 lb

Technical Rescue Load Limit 

150 kg/330 lb

otee:

Weight includes all straps, padding, and carrying case.

General specifications are rounded to the nearest whole number. 

Metric conversions are calculated before rounding the Imperial 

measurements. For more information, contact Ferno Customer 

Relations (page 2) or your Ferno distributor.

Ferno reserves the right to change specifications without notice.

general Use load limit

Inspect the KED® Pro if the load 

limit has been exceeded (See 

Inspecting the KED® Pro, 

page 33).

250 kg 

550 lb

Technical rescue

The KED® Pro is rated for a one-

person lift for vertical and confined-

space rescue. Specialized training is 

required.

150 kg 

330 lb 

Summary of Contents for KED Pro




































Reviews:

No comments

Brands by name

Popular brands

Load more brands