Ferno KED Pro User Manual Download Page 10

Page: 10 / 35

KED® Pro

Using the Features

4.5 Torso straps

The KED

Pro is constructed with three torso straps: top,

middle, and bottom. The straps are color coded for easily

matching the left and right pieces (Figure 8).

When wrapping the torso flaps around the patient, fasten the

middle (yellow) strap first, then the bottom (red) strap. Do not

fasten the top (green) strap until just before you are ready to

transfer the patient to a long spine board.

otee:

The strap buckling and adjusting sequence described

below is a preferred method. This procedure may not be

practical in all rescue situations. Follow your medical director’s

guidelines and local medical protocols.

ThE MiDDlE (yElloW) sTraP

Fasten the middle (yellow) strap first (Figure 9). Snug the strap

only until there is space for 2 or 3 fingers laid flat between the

strap and the patient’s torso. You will tighten the straps just

before transferring the patient to the long spine board.
The middle strap evenly secures the greatest possible area of

the KED

Pro, providing the greatest patient stability while you

finish applying the KED

Pro.

If the rescue situation or the patient’s condition requires that

you remove the patient from the vehicle more quickly than

anticipated, the stability provided by the KED

Pro with

only the middle strap fastened, and properly tightened, may

be preferable to using no supporting equipment. Follow your

medical director’s guidelines on this issue.

ThE boTToM (rED) sTraP

The bottom strap is red in color (Figure 10).

Snug the strap until there is space for 2 or 3 fingers laid flat

between the strap and the patient’s torso. You will tighten the

straps just before transferring the patient to a spine board.

ThE ToP (grEEn) sTraP

Leave the top strap unfastened until you are ready to transfer the

patient to the long spine board. This allows the patient to breathe

more freely while you finish applying the KED

Pro.

important

attaching all straps securely is strongly preferred.

However, the patient's condition or rescue situation

may require the patient to be removed from the

vehicle more quickly than anticipated. Within the

time permitted by the patient's and rescue conditions,

fasten as many straps as possible, in this order:

●

Middle strap

●

Bottom strap

●

Leg straps

●

Head/chin straps

●

Top strap

Figure 8 - Torso Straps

Figure 9 - Middle Strap Fastened

Figure 10 - Middle and Bottom Straps Fastened

Middle (Yellow)

Top (Green)

Bottom (Red)

Torso Strap Buckle (3)

Summary of Contents for KED Pro




































Search results

Summary of Contents for KED Pro

Reviews:

Brands by name

Popular brands

Ferno KED Pro, User Manual

Search results

Summary of Contents for KED Pro

Reviews:

Brands by name

Popular brands