32
© Ferno-Washington, Inc 234-3396-00 January 2011
KED® Pro
Storing the KED® Pro
hEaD sTraPs
If the head straps are not stored in the carrying case, press
one end of each strap against the hook-and-loop fastening
strips on the head area of the KED
®
Pro and lay the straps
parallel with the KED
®
Pro slats.
Torso FlaPs
1. Lay the KED
®
Pro flat with the buckles facing upward.
2. Release the three storage straps (Figure 66).
3. Beginning at the side with the torso straps, roll the
torso flap over the center of the KED
®
Pro, toward the
Figure 67 - Rolling the KED® Pro
Figure 68 - Attaching the Storage Straps
Figure 66 - Releasing the Storage Straps
Storage Strap (3)
Figure 69 - Ready for the Carrying Case
storage straps (Figure 66 and Figure 67).
4. Continue rolling the KED
®
Pro over the remaining
torso flap. Secure with the three storage straps (Figure
68 and Figure 69).
5. Open the carrying case by pulling the two loops away
from one another, then insert the KED
®
Pro into the
carrying case (Figure 70 and Figure 71).
6. Close the carrying case by pressing the hook-and-loop
fastening strips together (Figure 72).
7. The carrying case has adjustable shoulder straps
to allow the KED
®
Pro to be carried as a backpack
(Figure 73).
Figure 70 - Opening the
Carrying Case
Figure 71 - Storing the
KED® Pro
Figure 72 - Closing the
Carrying Case
Figure 73 - Carrying Case
Shoulder Straps
