13
© Ferno-Washington, Inc 234-3396-00 January 2011
KED® Pro
4.8 lifting handles
The KED
®
Pro is constructed with three lifting handles (Figure 14-
A). Use the handles when adjusting the KED’s vertical position on
the patient and during technical rescue.
The two side lifting handles provide the firmest holds for operators
to adjust the KED
®
Pro during fitting and when lifting and moving
the patient.
The top lifting handle serves as an extension of the leg straps
and offers a firm hold during confined-space or vertical rescue to
horizontally pull or vertically lift the patient. During a Technical
Rescue situation, attach a lifting bridle to all three lifting handles.
Adjust the bridle legs so they apply even pressure on all three
lifting handles.
Using ThE KED Pro For TEChniCal rEsCUE
When using the three lifting handles for a vertical lift:
●
The KED
®
Pro is rated for a one-person load at 150 kg
(330 lb)
●
Use a suitable lifting bridle with a load capacity of at
least 1,500 kg (3,300 lb. or 15Kn). The Ferno
®
KED
®
Pro
Lifting Bridle is recommended for this application (See
Accessories,
page 34).
●
Connect the bridle to all three carry handles and adjust to
ensure equal load on all three carry handles (Figure 14-B).
●
Ensure the leg straps and chest straps are tight and secure
before moving the patient.
important
Technical Rescue procedures require special skills and are
potentially hazardous activities. No rescue personnel should
attempt such rescue procedures unless they have received
professional instruction and training.
Using the Features
Technical rescue
The KED® Pro is rated for a one-person lift
for vertical and confined-space rescue.
Specialized training is required.
150 kg
330 lb
Lifting Handle (3)
Figure 14- Attaching a KED® Pro Lifting Bridle
To the KED® Pro Lifting Handles
14-A
14-B
