manualshive.com logo in svg

Ferno KED Pro, User Manual

Share
Download
Ferno KED Pro User Manual Download Page 17

17

© Ferno-Washington, Inc   234-3396-00   January 2011

KED® Pro

Using the KED® Pro

5.5  Placing the KED® Pro behind the Patient

1. 

One  operator  continues  to  hold  the  patient’s  head  and 

neck in neutral alignment as the KED

®

 Pro is applied.

2.  The second operator feels behind the lower torso and buttocks 

area of the patient and removes any articles (wallet, belt, etc.) 

that could interfere with sliding the KED

®

 Pro between the 

patient and the vehicle seat.

3.  With the buckles toward the seat, grasp the KED

®

 Pro at the 

top of the head flap and the top corner of the torso flap closest 

to the patient. Ensure the leg straps are on the patient side of 

the KED

®

 Pro. Do not loosen the leg straps before placing the 

KED

®

 Pro behind the patient.

4.  Tilt the KED

®

 Pro at about a 45-degree angle and slide it 

behind the patient (Figure 23).

otee:

Use the KED

®

 Pro’s vertical rigidity as an aid when sliding 

it behind the patient. Tilting the KED

®

 Pro at a 45-degree angle 

provides a rigid leading edge to slip between the patient and seat, 

prevents the KED

®

 Pro from rolling up, and allows the KED

®

 Pro 

to clear the vehicle roofline.

5.  The second operator (and any assistants) work the KED

®

 Pro 

down between the patient and the back of the seat and then 

into the vertical position (Figure 24). Work the KED

®

 Pro far 

enough down to clear the vehicle roofline and be positioned 

behind the patient’s head when the KED

®

 Pro is tipped to the 

vertical.

otee:

In certain exceptional situations such as a bucket seat or 

racecar seat, the operators may need to move the patient forward 

just enough (i.e., a hand’s thickness) to reduce friction so the KED

®

 

Pro slides smoothly between the patient and seat. Coordinate this 

effort with the operator stabilizing the patient’s head.

6.  While the KED

®

 Pro is moved to the vertical, the operator 

holding the patient’s head in neutral alignment lifts his or her 

elbow slightly to provide clearance for the KED

®

 Pro, taking 

care not to move the patient’s head.

7.  Use the lifting handles to center the KED

®

 Pro behind the 

patient.

Figure 23 - Sliding the KED® Pro At an Angle

Figure 24 - Centering the KED® Pro

Summary of Contents for KED Pro




































Reviews:

No comments

Brands by name

Popular brands

Load more brands