Ferno KED Pro User Manual Download Page 4

Page: 4 / 35

KED® Pro

1 - saFETy inForMaTion

1.1 Warning

Warning notices indicate a potentially hazardous situation

which, if not avoided, could result in injury or death.

Warning

Untrained operators can cause injury or be injured.

Permit only trained personnel to apply the KED® Pro.
improper use of the KED® Pro can cause injury. Use the

KED® Pro only for the purpose described in this manual.
improper application of the KED® Pro can cause injury.

apply the KED® Pro only as described in this manual.
an unattended patient can be injured. stay with the

patient at all times.
an unrestrained patient can fall off the spine board or cot

and be injured. Use restraints to secure the patient on the

spine board and cot.
Crossing the shoulder strap over the patient’s neck can

choke the patient. Fasten the shoulder strap only as

described in this manual.
attaching unapproved equipment or items to the KED®

Pro can cause injury. attach only equipment or items

specified in this manual.
improper maintenance can cause injury. Maintain the

KED® Pro only as described in this manual.
improper parts can cause injury. Use only Ferno parts on

the KED® Pro.
Modifying the KED® Pro can cause injury and damage.

Use the KED® Pro only as designed by Ferno.

1.2 important

Important notices emphasize important usage or maintenance

information.

important

1.4 bloodborne Disease notice

To reduce the risk of exposure to bloodborne diseases such

as HIV-1 and hepatitis when using the KED

Pro, follow the

disinfecting and cleaning instructions in this manual.

1.5 symbol glossary

The symbols defined below are used on the KED

Pro and/

or in this users’ manual. Ferno uses symbols recognized by

the International Standards Organization (ISO), American

National Standards Institute (ANSI) and the emergency

medical services industry.

General Warning of

Potential Injury

Safety Information

Read the Users’

Manual

General Use

Load Limit

250 kg

550 lb

1.3 be aware

Boxes like the one below serve as reminders.

be aware

Two Trained

Operators Required

Technical Rescue

Load Limit

150 kg

330 lb

Summary of Contents for KED Pro




































Search results

Summary of Contents for KED Pro

Reviews:

Brands by name

Popular brands

Ferno KED Pro, User Manual

Search results

Summary of Contents for KED Pro

Reviews:

Brands by name

Popular brands