8
© Ferno Washington Italia. Rel.010916
ITC - Retaining system for incubator
Assembly details
To assemble rotating blocks, position the plastic spacers
(code 2042729) on the frame, opening them up sufficiently
(figure 1); then proceed to lock them in place definitively
using the lower part of the block and the two respective
hexagon head screws (figure 4). Check that all the rotating
blocks have the pin aligned with the relevant seats on the
fixed blocks on the ITC-HL frame.
Components
For ITC-HL system, series 26/5126/35
Figure 1: Assembly of plastic spacer (code 2042729).
Figure 3: Detail of the fixed block (Female) installed on
the ITC-HL frame.
Figure 4: Assembly of fixed block on ITC-HL frame.
Figure 2: Detail of the rotating block (Male) with Pin to
be installed on the various stretchers.
