4
© Ferno Washington Italia. Rel.010916
ITC - Retaining system for incubator
Labels and product identification
Carefully read and follow the instructions for use; replace any damaged or worn label immediately. To obtain replacement
labels, contact Ferno Washington Italia's Customer Service.
The ITC-HL system is identified by the Part Number (PN) and by the Serial Number (SN) permanently printed on the label
applied to the product.
ITC-HL FRAME
Description
The ITC-HL system consists of a frame and a set of six rapid
anchorages. This device, in addition to the incubator, allows
for a safe newborn transport in accordance with current
regulations. If prearranged with the additional specific
blocks
(code 082-1942/ITC-HL)
, the ITC-HL system is
interchangeable with different Ferno stretchers and intra-
hospital transporters. The interchange manoeuvre is quick,
safe and made easy by 4 additional lifting handles. Stretchers
prearranged with 6-pin fasteners in the Proflexx series may
be fitted with accessories for bariatric patients and still be
used for all standard uses.
Features
•
High resistance aluminium alloy frame.
•
6-pin fastener with quick coupling.
•
4 lifting handles.
•
Maximum load capacity: 140 kg.
WARNING
Anchoring systems/blocks must be assembled only
by trained and qualified Ferno operators. All screws
must also be tightened correctly, with the threaded
part dampened with medium type threadlocker.
CE Compliance
MEDICAL DEVICES DIRECTIVE
Ferno's products meet the requirements of European Directive 93/42/EEC concerning medical devices. The locking device is
a Class I device.
The ITC-HL system is designed and manufactured by Ferno Washington Italia in compliance with the safety requirements
provided for by the Directive 93/42/EEC (class I) on medical devices and certified according to standard EN1789 on medical
vehicles and their equipment (test report "10G" No. 0139\ME\PCA\08 of 23/01/2009).
All materials used, duly sized to work correctly within the load limits appearing in the technical specifications, are flame-resistant,
do not release toxic or polluting substances, and are protected to ensure high resistance to wear and corrosion.
The ITC-HL system is compatible with:
• Series 26S - 26P - 26B;
• Series 5126 EL, Custom M;
• Series Mondial
• Series 35
• Series Inx
