Ferno ITC-HL User And Maintenance Manual Download Page 3

3

© Ferno Washington Italia. Rel.010916

ITC - Retaining system for incubator

 SAFETY INFORMATION

Read this user manual carefully. It is an integral part of the 

device and must always be stored close at hand. For your 

personal safety and for that of patients, please observe the 

following points:
Before every use, make sure that there are no signs of wear, 
damage and/or malfunctioning. Refer to section 

Inspection

In order to avoid infections and/or bacterial contaminations, 

follow what indicated in sections 5.2 and 5.3, 

Disinfection 

and 

Cleaning

.

Warning

The danger symbols draw attention to potentially dangerous 

situations that, if disregarded, may result in accidents, 

damage and/or injury.

 

WARNING

Improper use of the locking device may cause damage and/or injury. 
Install and use the locking device as described in this manual.  
Unauthorised modifications of locking device could cause serious 
damage, injury and/or unforeseeable operating problems. Do not 
modify or alter the locking device in any way. 

Any damage to the components of the locking device or to the entire 
system may affect its performance and safety. Inspect the locking 
device frequently, especially before and after each use. Place the 
locking device out of service if it shows signs of wear or damage. 

Improper maintenance may cause serious accidents and/or damage. 
Perform maintenance as instructed in this user manual.

The use of improper and/or unauthorised devices may cause 
accidents, damage, and/or injury. Use only devices that have been 
approved and authorised by Ferno Washington Italia. 

Unauthorised repairs, and repairs carried out by technicians not 

authorised by Ferno Washington Italia, will render all warranties null 

and void and may compromise the safety of the stretcher.
Non-original spare parts and inadequate repairs may cause damage 

and/or injury. Use only original Ferno parts and refer exclusively to 

Ferno Washington Italia Customer Support.

Important

Boxes labelled "Important" contain important

information on use and/or maintenance of the device.

Important

Blood-borne diseases

To reduce risks of exposure to infectious diseases that may 

be transmitted by blood, such as HIV-1 or Hepatitis, follow 

the instructions on disinfection and cleaning in this manual 

carefully.

Compatibility

The ITC-HL system is compatible with FERNO stretchers of 

the Proflexx 26B and 35P, 35A, 5126, 5126EL, 26S, Mondial, 

INX series and with the intra-hospital transporter 147. It allows 

fastening incubators with an overall weight not exceeding 140 

kg, including accessories, and compatible with the 4 anchorages 

(see diagram in section 4.1 of parts "A"), with centre distance 

of 218 mm x 525 mm (the latter centre distance can be 

slightly changed by moving the two incubator support 

bars, paying attention to always balance the weight of the 

incubator correctly on the ITC-HL frame).
Ferno Washington recommends using Ferno stretchers 

exclusively with Ferno locking devices, and using Ferno 

locking devices exclusively with Ferno stretchers.

Glossary of symbols

The symbols used in this manual and/or on the locking 

device's labels are defined below. The CE mark is present 

on the locking device and in this manual.

Read the user manual 

carefully

This product meets 

European Union 

Standards

Summary of Contents for ITC-HL






















Reviews: