3.2.3. Time Parameters
After making changes use the save changes button.
1. max. time, for which the DoorPhone is hanging up, this time can be extended
during call by sign choice from telephone (* or #).
2. Number of incoming call rings, the DoorPhone pick up after preseted number of
rings. After detection first ring - LED on front panel blinking. The number can be
set from 1 to 9.
3. max. time [sec] among button presses [range 1-9]
switch closing
- if time between two next presses is bigger than w time, the code
is not evaluated correctly.
dialing
- if the button, we are pressing, is the first password number for switch
closing, so the choice is delayed by this w time.
4. time [sec] for which the guard will hang up, before repeated dialing (button
pressing during call or dialing, busy tone detection) [range 1-5]
5. after finishing the dialing it calculates time (ringing tones). If the number exceeds
time in second, it will hang up [range 10-99]. The dialing is repeated in case, when
the dialing mode of 2 groups is set.
6. In default is status of DoorPhone signalling acoustically. If signalling makes
problem, so this signalling pick up / hang up prohibited.
7. In default is status of DoorPhone signalling acoustically. If signalling makes
problem, so this signalling others tones prohibited.
8. Default value - presetings to the firm settings. After making changes use the save
changes button.
Summary of Contents for PBX EA
Page 17: ...Picture 5 Connection of expansion modules 17 ...
Page 38: ...3 1 11 Restart ...
Page 42: ......
