Note:
The only relay 1 can be activated from phone and all sequence started. Besides
that the relay 2 can be separately activated from buttons by password.
2. password for relay closing from buttons or keyboard [2 to 6 digits]. Total 6
passwords, they are controlled by Day/Night; the combination is entered either by
DoorPhone buttons (first 1/2 buttons) or from attached keyboard (after pressing
of key symbol). The relay closing influences the set switch mode and Day/Night
switchover. By setting of choice mode of 2 number groups the DoorPhone is
permanently in DAY mode.
By password choice some rules have to be observed:
•
Select passwords in way not to find its combination out from wear of certain
buttons by frequent use.
•
Select the first password button from frequentless button for direct dialing (-
extends choice time)(-not valid for keyboard).
•
Pay attention to congruity of password numbers when one password includes
other one, e.g. relay 1 has 1212 and relay 2 has 12121. Then after second
pressing button 2 the only relay 1 is called, but password choice 212 for relay 2
can call both relays after secon pressing button 2.
3. Command from phone after relay closing [1 or 2 digits]. The same command can
be set for both relays, then they are activated at the same time. The advantage is
to set the same command both for relay closing and command to DoorPhone
hanging up.
Single digit command is entered as the first character to replace with "star" *. For
example, 2-digit code to shorten it to 55 single-typing * 5 The command is then
evaluated with only one pressing 5 on the phone.
4. Duration of relay closing in second [2 digits 01-99]
5. To prohibit the control during incoming call is important e.g. when using relay 2 in
mode 1 for control of garage gate opening, when the electronics opens the gate
and the gate is closed by car passage. Then the control from phone could
undesirably cause the permanent gate opening (not closed - no car passage).
6. time in second between close relays 1 and 2 by mode setting of relay 2 is 5
(gradual opening) [2 digits 01-99]
7. Default value - presetings to the firm settings. After making changes use the save
changes button.
43
Summary of Contents for PBX EA
Page 17: ...Picture 5 Connection of expansion modules 17 ...
Page 38: ...3 1 11 Restart ...
Page 42: ......
