Fermax LYNX SKYLINE, Installer Manual

Page: 34 / 68

Pag 34
Pag 34
L LL LLYNX Sk YNX Sk YNX Sk YNX Sk YNX Skyline yline yline yline yline Amplif Amplif Amplif Amplif Amplifier ier ier ier ier
L LL
LLYNX Sk
YNX Sk
YNX Sk YNX Sk
YNX Skyline yline
yline yline
yline Amplif Amplif
Amplif Amplif
Amplifier ier
ier ier
ier
L LL
LLYNX Sk
YNX Sk
YNX Sk YNX Sk YNX Skyline
yline
yline yline yline Amplif
Amplif
Amplif Amplif Amplifier
ier
ier ier ier
L LL LLYNX Sk YNX Sk YNX Sk YNX Sk YNX Skyline yline yline yline yline Amplif Amplif Amplif Amplif Amplifier ier ier ier ier
RESTORE DEFAULT VALUES: Reset
The LYNX amplifier has a ‘Reset’ function which can be used to
restore programmed default values and settings.
This operation is carried out by electrically modifying the equipment,
with the aim of restricting anyone without physical access to the
equipment from modifying it in any way.
Steps:
1. Disconnect the system’s power supply.
2. Short the amplifer´s «BS» and «-» terminals.
If the system is equipped with an exit button ( BS, -) just
press and hold it down.
3. Reconnect the system’s power supply and keep the short-
circuit (or maintain the exit button) until you hear a «beep.»
After that sound you can remove the «BS» and «-» terminal´s
short or release the button.
After completing these steps, the panel has restored the settings to
its default values.
RESTORE DEFAULT VALUES: Reset
The LYNX amplifier has a ‘Reset’ function which can be used to
restore programmed default values and settings.
This operation is carried out by electrically modifying the equipment,
with the aim of restricting anyone without physical access to the
equipment from modifying it in any way.
Steps:
1. Disconnect the system’s power supply.
2. Short the amplifer´s «BS» and «-» terminals.
If the system is equipped with an exit button ( BS, -) just
press and hold it down.
3. Reconnect the system’s power supply and keep the short-
circuit (or maintain the exit button) until you hear a «beep.»
After that sound you can remove the «BS» and «-» terminal´s
short or release the button.
After completing these steps, the panel has restored the settings to
its default values.