Fermax LYNX SKYLINE, Installer Manual

Page: 31 / 68

Pag 31
Pag 31
L LL LLYNX Sk YNX Sk YNX Sk YNX Sk YNX Skyline yline yline yline yline Amplif Amplif Amplif Amplif Amplifier ier ier ier ier
L LL
LLYNX Sk
YNX Sk
YNX Sk YNX Sk
YNX Skyline yline
yline yline
yline Amplif Amplif
Amplif Amplif
Amplifier ier
ier ier
ier
L LL
LLYNX Sk
YNX Sk
YNX Sk YNX Sk YNX Skyline
yline
yline yline yline Amplif
Amplif
Amplif Amplif Amplifier
ier
ier ier ier
L LL LLYNX Sk YNX Sk YNX Sk YNX Sk YNX Skyline yline yline yline yline Amplif Amplif Amplif Amplif Amplifier ier ier ier ier
EN
Important notes:
- The PUSH BUTTON panel may only be configured remotely via
the incorporated web server.
- Various functions such as: Configuration of the push buttons,
audio and voice synthesiser language settings...etc, must also
be configured this way. This web server can be accessed via
the panel´s IP address. For more details see the LYNX Panel´s
Web server manual cod. 970020 at www.fermax.com.
- The panel's IP address can be configured by choosing between
different modes: Standard Lynx mode (default selection.
Button panels IP: 10.200.0.0 . ) / DHCP mode / Static IP mode.
- PUSH BUTTON panels are configured as a panel:
* BLOCK entrance : only calls the monitors in the same block.
The pushbuttons are programmed using 4 digits: [0001 - 8190].
* GENERAL ENTRANCE : calls the monitors of all blocks. The
pushbuttons are programmed using 6 digits.
General entrance : BB UUUU , where:
BB = block number [00 UUUU , 99 UUUU ]
UUUU = residence number [00 0001 , 99 8190 ].
EN
Important notes:
- The PUSH BUTTON panel may only be configured remotely via
the incorporated web server.
- Various functions such as: Configuration of the push buttons,
audio and voice synthesiser language settings...etc, must also
be configured this way. This web server can be accessed via
the panel´s IP address. For more details see the LYNX Panel´s
Web server manual cod. 970020 at www.fermax.com.
- The panel's IP address can be configured by choosing between
different modes: Standard Lynx mode (default selection.
Button panels IP: 10.200.0.0 . ) / DHCP mode / Static IP mode.
- PUSH BUTTON panels are configured as a panel:
* BLOCK entrance : only calls the monitors in the same block.
The pushbuttons are programmed using 4 digits: [0001 - 8190].
* GENERAL ENTRANCE : calls the monitors of all blocks. The
pushbuttons are programmed using 6 digits.
General entrance : BB UUUU , where:
BB = block number [00 UUUU , 99 UUUU ]
UUUU = residence number [00 0001 , 99 8190 ].