Fermax LYNX SKYLINE, Installer Manual

Page: 32 / 68

Pag 32
Pag 32
L LL LLYNX Sk YNX Sk YNX Sk YNX Sk YNX Skyline yline yline yline yline Amplif Amplif Amplif Amplif Amplifier ier ier ier ier
L LL
LLYNX Sk
YNX Sk
YNX Sk YNX Sk
YNX Skyline yline
yline yline
yline Amplif Amplif
Amplif Amplif
Amplifier ier
ier ier
ier
L LL
LLYNX Sk
YNX Sk
YNX Sk YNX Sk YNX Skyline
yline
yline yline yline Amplif
Amplif
Amplif Amplif Amplifier
ier
ier ier ier
L LL LLYNX Sk YNX Sk YNX Sk YNX Sk YNX Skyline yline yline yline yline Amplif Amplif Amplif Amplif Amplifier ier ier ier ier
- In a PUSHBUTTON panel you can configure the pushbuttons
to call the different PMU (gurad units). The pushbuttons are
programmed using 5 digits. Depending on your configuration, a
pushbutton can call a group of PMUs as
General Entrance , a
range of Various blocks or Block Entrance.
* General entrance :
100 XX , where XX = PMU number [100 00 , 100 99 ].
* Various blocks :
200 XX , where XX = PMU number [200 00 , 200 99 ].
* Block entrance : YYY XX , where:
YYY = block number [000 XX , 099 XX ]
XX = PMU number [000 00 , 099 99 ].
- Call filter in PUSHBUTTON panels. You can activate a
restriction via a list of calls (up to 200 residence terminals), so
that you can only call the monitors/telephones that are included
in this list.
can always call a monitor/telephone even if not in the list of a
PMU.
This function is configured via the web server, via the Call
settings/Call filter box (activated).
Only monitors/telephones of the list (filtered) can see the panel
in its panels lists.
- In a PUSHBUTTON panel you can configure the pushbuttons
to call the different PMU (gurad units). The pushbuttons are
programmed using 5 digits. Depending on your configuration, a
pushbutton can call a group of PMUs as
General Entrance , a
range of Various blocks or Block Entrance.
* General entrance :
100 XX , where XX = PMU number [100 00 , 100 99 ].
* Various blocks :
200 XX , where XX = PMU number [200 00 , 200 99 ].
* Block entrance : YYY XX , where:
YYY = block number [000 XX , 099 XX ]
XX = PMU number [000 00 , 099 99 ].
- Call filter in PUSHBUTTON panels. You can activate a
restriction via a list of calls (up to 200 residence terminals), so
that you can only call the monitors/telephones that are included
in this list.
can always call a monitor/telephone even if not in the list of a
PMU.
This function is configured via the web server, via the Call
settings/Call filter box (activated).
Only monitors/telephones of the list (filtered) can see the panel
in its panels lists.