Page 43
LYNX Monitor
3.2.12 Default fun Optional functions enabled.
PICTURE VIEW
This function allows you to view all captured images.
To see images that have been captured, press the
images
icon on the home screen.
The most recent image is displayed, along with the pre-defi ned description of the
Terminal from
which the call was made, the date and the time.
Scrolling from left to right will display the
most recent photos (sequentially).
If the image is pressed once, it will be displayed in full-screen mode. Clicking on the image again
will take the user back to the previous presentation.
To
delete
an image, select the desired image and press the
delete
button (recycle bin);
confi rmation will be required. The selected image (which will be displayed a little larger than the
rest) will be deleted.
IMAGE RESET.
To
erase all existing images
, hold down the
delete
(recycle bin) button for
more than 1 second. Confi rmation will be required. These actions are not synchronised across
monitors in the same house.
3.2.13 Default fun Optional functions enabled.
LIFT CONTROL
When the
lift control
icon is pressed on the start menu, the lift is sent to the fl oor where the user
lives (for a predefi ned period of time). Up to 3 relays can be activated when this icon is pressed
(depending on the installation / confi guration determined by the installer, parameters defi ned
under the
option
3.1.9.3 Lift control settings)
. The relay must be in the same block as the monitor.
The monitor displays the action undertaken on the screen.
