Page 21
LYNX Monitor
3.1.9 General Settings.
INSTALLER SETTINGS
Press
Installer Settings,
enter the
installer PIN code
(which is
4444
by default), press
OK
and
access the screen containing various icons allowing you to make adjustments.
Note:
- The installation settings function is protected by a PIN so that it can only be manipulated by qualifi ed
personnel.
3.1.9.1 General Settings. Installer Settings
MONITOR SETTINGS
The monitor’s IP address can be confi gured by choosing between different modes, which
are as follows:
- Standard Lynx mode (default selection).
- DHCP mode.
- Static IP mode.
vivo
smile
Open to select other modes
Note:
- All devices on the same installation must be confi gured following the same mode, either all set to Lynx
Mode, or all set to static DHCP / IP mode.
