Page 37
LYNX Monitor
SOS
SLEEP mode.
(blue)
SOS
OUT mode.
(red)
Notes:
- In areas where Delayed Activation Mode applies, the system will offer a 100-second delay before arming
when the safety level is increased. For example: After switching from Home mode to Out mode, 100
seconds will pass during which the door can be opened in order to leave the house without triggering
the alarm.
- Pre-Alarm Warning. The monitor, after receiving a pre-alarm command from the Sensor Unit Module,
displays a keypad allowing you to enter the alarm PIN and deactivate the alarm before it is triggered.
When a sensor is activated, the system offers a 40-second pre-alarm period before sending the alarm.
For example: After you enter the house, if the alarm mode is set to Off, the system will wait for 40 seconds
until the alarm mode is changed to Home or Sleep before sending the alarm.
When an alarm is triggered, a notifi cation is sent to the corresponding Property Alarm Management
Unit (Concierge). The monitor, upon receipt of an alarm, forwards it to the Property Alarm
Management Unit, with the following details: The house number, the sensor module address,
the area number and the area name (if defi ned). The monitor will also generate an alarm tone
for 300 seconds.
