USER’S MANUAL OF WLAN ACCESS POINT
Version: 1.1
previous configuration setting.
3.3.7
WDS Settings
Wireless Distribution System uses wireless media to communicate with other
APs, like the Ethernet does. To do this, you must set these APs in the same
channel and set MAC address of other AP that you want to communicate with in
the table and then enable the WDS.
Screen snapshot – WDS Setup
20
Item
D
escription
Enable WDS
Click the check box to enable wireless distribution
system. Refer to 4.21 What is Wireless Distribution
System (WDS)?
MAC Address
Fill in the MAC address of AP to register the wireless
distribution system access capability.
Comment
Fill in the comment tag for the registered AP.
Apply Changes
Click the
Apply Changes
button to register the AP to new
configuration setting.
Reset Click
the
Reset
button to abort change and recover the
previous configuration setting.
Set Security
Click button to configure wireless security like
