USER’S MANUAL OF WLAN ACCESS POINT
Version: 1.1
Key Length
Select the WEP shared secret key length from pull-down
menu. The length can be chose between 64-bit and
128-bit (known as “WEP2”) keys.
The WEP key is composed of initialization vector (24
bits) and secret key (40-bit or 104-bit).
Key Format
Select the WEP shared secret key format from pull-down
menu. The format can be chose between plant text
(ASCII) and hexadecimal (HEX) code.
Default Tx Key
Set the default secret key for WEP security function.
Value can be chose between 1 and 4.
Encryption Key 1
Secret key 1 of WEP security encryption function.
Encryption Key 2
Secret key 2 of WEP security encryption function.
Encryption Key 3
Secret key 3 of WEP security encryption function.
Encryption Key 4
Secret key 4 of WEP security encryption function.
Apply Changes
Click the
Apply Changes
button to complete the new
configuration setting.
Close
Click to close this WEP Key setup window.
Reset Click
the
Reset
button to abort change and recover the
previous configuration setting.
WEP encryption key (secret key) length:
Length
Format
64-bit
128-bit
ASCII
5 characters
13 characters
HEX
10 hexadecimal codes
26 hexadecimal codes
18
3.3.6
Wireless - Access Control
If you enable wireless access control, only those clients whose wireless MAC
addresses are in the access control list will be able to connect to your Access
Point. When this option is enabled, no wireless clients will be able to connect if
the list contains no entries.
