33
Troubleshooting
No power
• Make sure the TV and the power cord are connected correctly.
• Check if you pressed POWER on the remote control unit. If the indicator on the front panel is red,
press POWER on the remote control or the front panel.
LCD TV does not operate
• External influences such as lightning or static electricity may cause improper operation. In this case,
operate the unit after first turning on the power, or unplugging the AC cord and plugging it in again
after 1 or 2 minutes.
Power is cut off suddenly
• Check of the off timer or sleep timer are set.
• The unit’s internal temperature has increased. Remove any objects blocking the vents and clean them
to remove dust.
Remote control unit does not operate
• Check if the batteries are inserted with the polarity (+,-) correctly aligned.
• Check if the batteries are discharged. Please replace with new batteries.
• Make sure that you do not use the remote control under strong or fluorescent lighting.
• Check if there is a fluorescent light illuminated near the remote control sensor.
• The path of the remote control beam may be blocked; please make sure the path is clear and that the
remote control is aimed at the remote control sensor on the TV.
No CATV reception (or no reception above CH13)
• CATV is connected improperly or not connected; please check all the CATV connections.
• The cable TV service is interrupted; please contact your cable operator.
Picture is cut off/with side bar screen.
• Check if the image position is correct.
• Check if the screen mode adjustments such as picture size are made correctly.
Strange colour, light colour, or colour misalignment
• Is the room too bright? The picture may look dark in a room that is too bright.
• Check the input signal setting.