11
ANT port
The ANT jack is provided to directly connect cable TV, satellite or an
antenna as follows:
1. Connect one end of a CATV 75
Ω
coaxial cable to the ANT jack on
the rear panel of the TV.
2. Connect the other end of this cable to the CATV jack as shown
below on the left. You may also need to use a cable adapter to
connect to your CATV wall mounting, depending on your
installation.
If you have subscribed to a cable TV system using scrambled or
encoded signals requiring a cable box to view all channels, connect
the ANT jack to the cable box’s ANTENNA OUT jack.
Component IN port
The COMPONENT IN port lets you connect your TV to
high quality video equipment such as a DVD player,
digital TV receiver, or digital satellite receiver. This port
consists of component audio (L, R) and video (YCbCr or
YPbPr) connectors and provides the highest picture
quality. To connect your A/V device to this port, do the
following:
1. Using a component video cable, connect the video
(YCbCr / YPbPr) jacks on the TV to the corresponding
video output jacks of your A/V device.
2. Using an audio cable, connect the audio (L, R) jacks
on the TV to the corresponding audio output jacks of
your A/V device.
It is strongly recommended that you connect the antenna using a 75
Ω
coaxial cable to get optimum
picture and sound quality. A 300
Ω
twin lead cable can be easily affected by radio and other
background noise, resulting in signal deterioration. When using a 300
Ω
twin lead cable, please keep
this cable as far away from the TV as possible.
ANT
R
R
L
Y
Pb/Cb
Pr/Cr
PC/IN
PC AUDIO IN
SCART2 -IN
SCART1 -IN
L
R
L
R
L
S-VIDEO
VIDEO
VIDEO
S-IN
AV-IN
AV-OUT
COMPONENT IN
ANT
R
R
L
Y
Pb/Cb
Pr/Cr
PC/IN
PC AUDIO IN
SCART2 -IN
SCART1 -IN
L
R
L
R
L
S-VIDEO
VIDEO
VIDEO
S-IN
AV-IN
AV-OUT
COMPONENT IN
Y
L
R
Cb
Cr
Video
Audio
