Fenix Imvico TK14, Operation Manual

Page: 42 / 59

FENIX IMVICO TK14 OPERATION MANUAL
42/65
GS w n
[Name] Set bar code width
[Format] ASCII GS w n
Hex 1D 77 n
Decimal 27 119 n
[Range] <02>H
≤
n
≤
<06>H
[Description] Sets the horizontal size of the bar code.
n specifies the bar code width as follows:
n Module Width (mm) for
Multi-level Bar Code
<02>H 0.250
<03>H 0.375
<04>H 0.500
<05>H 0.625
<06>H 0.750
•
Multi-level bar codes are as follows: EAN13, CODE93, ITF.
[Default] n = <03>H
[Reference] GS k
GS v 0 m xL xH yL yH d1 ... dk
[Name] Print raster bit image
[Format] ASCII GS v 0 m xL xH yL yH d1...dk
Hex 1D 76 30 m xL xH yL yH d1...dk
Decimal 27 118 48
m xL xH yL yH d1...dk
[Range] <00>H
≤
m
≤
<03>H
<00>H
≤
xL
≤
<FF>H
<00>H
≤
xH
≤
<FF>H where 1
≤
(xL + xH x 256)
≤
128
<00>H
≤
yL
≤
<FF>H
<00>H
≤
yH
≤
<08>H where 1
≤
(yL + yH x 256)
≤
4095
<00>H
≤
d
≤
<FF>H
k = (xL + xH x 256) x (yL + yH x 256) (k
≠
0)
[Description] Selects raster bit-image mode. The value of m selects the mode, as follows:
m Mode
Vertical Dot
Density
Horizontal Dot
Density
<00>H Normal 203.2 dpi 203.2 dpi
<01>H Double-width 203.2 dpi 101.6 dpi
<02>H Double-height 101.6 dpi 203.2 dpi
<03>H Quadruple 101.6 dpi 101.6 dpi
(dpi: dots per 25.4 mm {1"})
•
x L, x H, select the number of data bytes (x L+ xH x 256) in the horizontal direction for the
bit image.
•
y L, y H, select the number of data bits (y L+ yH x 256) in the vertical direction for the bit
image.
[Notes] This command is effective only when there is no data in the print buffer.
•
Data outside the printing area is read in and discarded on a byte-by-byte basis.
•
The position at which subsequent characters are to be printed for raster bit image is
specified by
GS L
(Set left margin).
•
d indicates the bit-image data. Setting a bit to 1 prints a dot and setting it to 0 does not
print a dot.
[Example] When xL + xH x 256 = 64