Fenix Imvico TK14, Operation Manual, Page: 40 / 59

FENIX IMVICO TK14 OPERATION MANUAL
40/65
GS H n
[Name] Select print position for HRI characters.
[Format] ASCII GS H n
Hex 1D 48 n
Decimal 29 72 n
[Range] n = 0/3
[Description] Selects the print position of HRI characters when printing a bar code.
n selects the print position as follows:
n Printing position
0 Not printed
1 Above the bar code
2 Below the bar code
3 Both above and below the code bar
[Notes]
•
HRI indicates Human Readable Interpretation
•
HRI characters are printed using X-scale = 1, Y-scale = 1 and the font specified by GS f.
[Default] n = <02>H
[Reference] GS f, GS k
GS h n
[Name] Select bar code height
[Format] ASCII GS h n
Hex 1D 68 n
Decimal 27 104 n
[Range] <01>H
≤
n
≤
<FF>H
[Description] Selects the height of the bar code.
n specifies the bar code height in the vertical direction [ n x 0.0625 mm (0.0049”)].
[Default] n = <A0>H (10mm)
[Reference] GS k
GS k m n d1...dn
[Name] Print bar code
[Format] ASCII GS k m n d 1... dn
Hex 1D 6B m n d 1... dn
Decimal 27 107 m n d1...dn
[Range] m= <43>H , m = <45>H, m= <46>H or m= <49>H
(n and d depend on the bar code system used).
[Description] Selects a bar code system and prints the bar code.
m selects a bar code system as follows:
m Bar Code System Number of Characters Remarks
<43>H EAN13 n = <0C>H
<30>H
≤
d
≤
<39>H
<45>H CODE39
<01>H
≤
n
≤
<FF>H <30>H
≤
d
≤
<39>H, <41>H
≤
d
≤
<5A>H, <20>H, <24>H, <25>H,
<2B>H, <2D>H, <2E>H, <2F>H
<46>H ITF
<01>H
≤
n
≤
<FF>H
(even number)
<30>H
≤
d
≤
<39>H
<49>H Code128
<02>H
≤
n
≤
<FF>H <00>H
≤
d
≤
<7F>H
[Notes]
•
n indicates the number of bar code data bytes, and the printer processes n bytes from
the next character data as bar code data.
•
If n is outside the specified range, the printer stops command processing and
processes the following data as normal data.
•
If d is outside the specified range, the printer only feeds paper and processes the
following data as normal data.
•
If the horizontal size exceeds printing area, the printer only feeds the paper.
•
This command feeds as much paper as is required to print the bar code, regardless of
the line spacing specified by
ESC 2
or
ESC 3
.