Fenix Imvico TK14, Operation Manual

Page: 12 / 59

FENIX IMVICO TK14 OPERATION MANUAL
12/65
For these reasons, FENIX suggests the following systems as solutions to a correct installation:
The printer must be set quite near the front side of the user’s chassis.
Special care in the design of the part which goes from the printer outlet to the paper guide (paper jams
can occur due to an inappropriate design).
As the printer is placed very near the user’s chassis, some system must be implemented in order to move
the printer when accessing the printing head (i.e. giving the fixing holes of the chassis an oval shape to
allow the printer moving forward and backward).
Fig. 2.2-
Nozzle hole dimension.
Depending on the construction materials, care must be taken with static electricity; otherwise tickets may
get stuck in the paper guide and never reach the receptacle.
Be sure to make a good earth connection, performing one of the following schemes:
Fig. 2.3- TK14 earth connection .
MINIMAL NOZZLE
HOLE DIMENSION IN
THE USER FRONT
PANEL
a) The earth connection is at
the power supply and shorted
with the negative terminal.
The chassis is connected to
earth shorting the jumper J1.
b)
The negative terminal is
floating.
The chassis is connected to
earth by a cable from the
main earth connection.
Power
supply
J1
C0N1
Chassis
Tk14
earth
shorted
Power
supply
J1
C0N1
Chassis
Tk14
NOT shorted
M3 Screw + Grower