Fenix Imvico TK14, Operation Manual

Page: 39 / 59

FENIX IMVICO TK14 OPERATION MANUAL
39/65
GS T n
[Name] Set print position to the beginning of print line
[Format] ASCII GS T n
Hex 1D 54 n
Decimal 27 84 n
[Range] n = <00>H or n = <01>H
[Description] Sets the print position to the beginning of print line.
•
n specifies the data processing in the print buffer.
n Printing position
<00>H Sets the print position to the beginning of print line after deleting all
data in the print buffer.
<01>H Sets the print position to the beginning of print line after printing all data
in the print buffer.
GS V m
[Name] Feeds paper to the passive cutter line.
[Format] ASCII GS V m
Hex 1D 56 m
Decimal 27 86 m
[Range] m = <01>H
[Notes]
•
There are 26 mm of distance between the thermal head line and the passive
cutter line. This command arranges the ticket to be cut, feeding paper
automatically.
•
This command is effective only when processed at the beginning of a line.
Afterwards the ticket is cutting by the user, the printer feeds the paper back to the
printing position.
•
Sending this command, user informs to TK14 that actual ticket is completely
finished; so TK14 can make internal controls to right performance.
GS f n
[Name] Select font for Human Readable Interpretation (HRI) characters
[Format] ASCII GS f n
Hex 1D 66 n
Decimal 27 102 n
[Range] n = <00>H or <01>H
[Description] Selects a font for the HRI characters used when printing a bar code.
n selects a font from the following table:
n Font
<00>H Font A (12x24)
<01>H Font B (8x16)
[Notes]
•
HRI indicates Human Readable Interpretation
•
HRI characters are printed at the position specified by GS H .
•
HRI characters are always printed at X-Scale = 1 and Y-Scale = 1
[Default] n = <01>H
[Reference] GS H, GS k