Fenix Imvico TK14, Operation Manual

Page: 31 / 59

FENIX IMVICO TK14 OPERATION MANUAL
31/65
LF
[Name] Print and line feed
[Format] ASCII LF
Hex 0A
Decimal 10
[Description] Prints the data in the print buffer and feeds one line, based on the current line spacing.
[Note]
This command sets the print position to the beginning of the line.
[Reference] ESC 2 , ESC 3 .
CR
[Name] Print and carriage return
[Format]
ASCII CR
Hex 0D
Decimal 13
[Description] When automatic line feed is enabled, this command operates the same as
LF
; when
automatic line feed is disabled, this command is ignored.
[Notes]
•
This command is set at the start-up, via the PROGRAMMING MODE
(see point 3.6.2- PROGRAMMING MODE ).
•
Sets the print starting position to the beginning of the line.
[Reference] LF
DLE EOT n
[Name] Real-time status transmission
[Format]
ASCII DLE EOT n
Hex 10 04 n
Decimal 16 04 n
[Range] <01>H
≤
n
≤
<04>H
[Description] Transmits the selected printer status specified by n in real-time, according to the following
parameters:
n = <01>H: Transmit printer status
n
= <02>H: Transmit offline status
n = <03>H: Transmit error status
n = <04>H: Continuous paper sensor status
n = <05>H: Paper sensor status
[Notes]
•
The status is transmitted whenever the data sequence <10>H<04>H<n>
( <01>H
≤
n
≤
<05>H) is received.
•
The printer transmits the current status. Each status item is represented by one-byte of
data.
•
The printer transmits the status without confirming whether the host computer can
receive data (in serial interface).
•
The printer executes this command upon receiving it.
•
This command is executed even when the printer is offline, the receiver buffer is full, or
there is an error status with a serial interface model.
•
If a not recovery error occurred, the bit 2 in the Printer Status ( n =1) will be
indeterminate.
n = <01>H:
Printer status
Bit OFF/ON Function
0 OFF Not used. Fixed to OFF
1 ON Not used. Fixed to ON
2 OFF Not used. Fixed to OFF
OFF Online
3
ON Offline
4 ON Not used. Fixed to ON
5 OFF Does not wait for online error recovery
ON Waits for online error recovery
6 - Undefined
7 OFF Not used. Fixed to OFF