KS55 SERIES OPERATION MANUAL
GS
V
m (1)
GS
V
m
n (2)
[Name]
Select cut distance and cut paper
[Format]
1)
ASCII
GS
V
m
Hex
1D
56
m
Decimal
29
86
m
2)
ASCII
GS
V
m
n
Hex
1D
56
m
n
Decimal
29
86
m
n
[Range]
1)
m
= <01>H
2)
m
= <42>H; <00>H
≤
n
≤
<FF>H
[Description]
Selects a distance for cutting paper and executes a full cut. The value of
m
sets the
distance as follows:
m
Cutting distance
<01>H
Cuts the paper in the current position.
<42>H
Feeds paper (“
cutting-D
” + [
n
x 0,125mm]), and cuts the paper.
[Notes for
1)
and
2)
]
●
This command is effective only when processed at the beginning of a line
●
“
Cutting-D
” is the distance between the thermal head (printing position) and the cutter
(8.4mm).
●
After cutting the ticket, the printer always feeds the paper back to the printing
position.
●
If this command is sent without cutter connection, the printer enter cutter error status.
[Notes for
1)
]
●
The printer cuts paper at the current position, even when the black mark is
enabled.
[Notes for
2)
]
●
Black mark disabled:
–
When
n
= <00>H, the printer feeds paper “
Cutting-D
” and cut it.
–
When
n
≠
<00>H, the printer feeds paper (“
Cutting-D
” + [
n
x 0.125 mm]) and cuts
it.
●
Black mark enabled:
–
When the black mark sensor is set to be effective, the printer feeds paper to
(black mark
±
[(value which is set by
GS ( F
) x 0.1625mm]) and cuts it. After
cutting, it feeds paper to the position specified by the command
GS ( F
. See point
– Black mark sensor
.
[Default]
n
= <00>H
[Reference]
GS ( F, ESC i, ESC m
GS
a
n
[Name]
Automatic status report
[Format]
ASCII
GS
a
n
Hex
1D
61
n
Decimal
29
97
n
[Range]
<00>H
≤
n
≤
<01>H, <30>H
≤
n
≤
<31>H
[Description]
●
Enable/disable automatic status report.
n
Function
<00>H / <30>H Disable automatic status report
<01>H / <31>H Enable automatic status report
●
When enabling the automatic status report, the printer remains in this state
indefinitely, until it becomes disabling, or until switch the power off.
●
After enabling the automatic status report, the printer returns the 5 states mentioned
in the command
DLE EOT n
, every 0.5 seconds in the following order:
44 of 66
