FENIX IMVICO EPC1100 OPERATION MANUAL
7/37
2 - INSTALLATION
2.1.- INSTALLING THE EPC1100 PRINTER
The EPC1100 is a panel printer thought to be easily set into a wall, a case or another
kind of appropriate receptacle. To install the EPC1100 printer follow next steps:
•
Make a rectangular hole of 91x124 mm (approx.) on the surface where the printer
will be set.
•
Place the EPC1100 printer into the hole and push until the pieces marked with an A
in Fig. 2.1 make pressure enough to secure the EPC1100 to the surface.
•
Optionally, two metric screws DIN965 M3 / L35 (Part B in Fig. 2.1) can provide
better holding of the EPC1100 to the surface.
•
Connect the power supply and the communications port to the back side of the
printer (see Fig.2.2 EPC1100 connectors location or refer to chapters 2.2.1.- Power
supply connector and 2.2.2.- Communications Connector).
Fig. 2.1- EPC1100 installation.
A
A
B
