FENIX IMVICO EPC1100 OPERATION MANUAL
34/37
____________________________________________________________________
APPENDIX B – SPECIFICATIONS
EPC1100
Printing method Thermal dot line
Printing mechanism SEIKO LTPH245
Data interface
8 bit parallel CENTRONICS
RS232 Serial/ TTL serial
Dot composition/line
384
Resolution 8 dots/mm
Printing speed (mm/sec)(1)
21 ( in fixed division mode and Vp =5v)
11 average (in dynamic division mode and Vp=5v)
62 (in fixed division mode and Vp=8,5v)
Paper width (mm)
58
Printing width (mm)
48
Character/line(2)
32 (normal mode)
Operating voltage range
Vcc --> 5v+/-5%
Vpp --> 4,2v to 8,5v
Current consumption
(see 2.2.1.Power supply
connector).
Average (in dynamic division mode):
Vpp ---> 2,19 A (at 5v)
2,8 A (at 7,2v)
3 A (at 8v)
Vcc ---> 20 mA
Maximum (in fixed division mode):
Vpp ---> 5,7 A (at 5v)
Dimensions WxDxH (mm)
95x52x128
Operating temperature
-0ºC to 50ºC (noncondensing)
Storage temperature
-20ºC to 60ºC (noncondensing)
Weight
300 gr. Aprox.
Paper feed force
0,49N (50gf) or more
Paper hold force
0,78N (80gf) or more
Recommended thermal
Paper
TF50KS-E2C (65 µm paper)
TP50KJ-R (65 µm paper)
AP50KS-E (65 µm paper)
from Nippon Paper Industries
HP220-AB1 (65 µm paper)
from Mitsubishi Paper Industries
PD160R-N (75µm paper) (3)
from Oji Paper Industries
Life span (at 25ºC and
rated energy)
Activation pulse resistance
Abrasion resistance
100 million pulses or more (print ratio = 12,5%)
50 Km or more
(1) At 25ºC of thermal head temperature, normal character (16 dot lines) and line
spacing of 16 dots.
(2) 4 dots character spacing (See ESC+SP+n command).
(3) When the print ratio is high, this thermal paper may generate a noise during
printing.
