FENIX IMVICO EPC1100 OPERATION MANUAL
24/37
________________________________________________________________
ESC + ‘J‘ + n n-dot LINE FEED
________________________________________________________________
Decimal codes:
<27><74><n>
Hexadecimal codes:
<1B><4A><n>
Function: Feeds the paper forward.
n can take on value from 0 to FFH (0 to 255 dot line).
Operation: Feeds the paper by the specified line spacing then feeds n dot lines
forward.
________________________________________________________________
ESC + ‘A’+ n n -DOT LINE SPACING
ESC+ ‘3’ + n
________________________________________________________________
Decimal codes:
<27><65><n>
Hexadecimal codes:
<1B><41><n>
Function: Sets line spacing to “n” dots. (line spacing in mm = “n” x 0,125).
“n” can take on value from 20H to 7FH (4 to 127 dot line). The default value
for “n” is 16H (2,5mm).
________________________________________________________________
ESC + SP+ n CHARACTER SPACING
________________________________________________________________
Decimal codes:
<27><32><n>
Hexadecimal codes:
<1B><20><n>
Function: Sets the character spacing to n dots. The least significant 4 bits are valid for
n (0 to 16).
Operation: The specified amount of space is appended to the right side of each
character. The n is initialised to 4 dots.
The LTPH245 is 384 dots width, and the EPC1100 internal character font is 8 (width)
x 16 (height). So, the following table shows the number of the column that user can
get changing the character spacing (in normal character: 8 dots width):
Character spacing
Column number (characters/line)
n = 1
42
n =2
38
n =3
34
n =4
32
n =5
29
n =6
27
n = 7
25
n = 8
24
.
.
.
.
.
.
Table 5.1- Character/line in relation to character spacing.
