- 20 -
FDM-4000i Manual V1.0
default is Normal. Use the Scroll Up/Down button to select the desired RF Output and
press the OK button to set.
CELL ID
– Use the Scroll Up/Down button to select CELL ID. Press the OK button to
enter the CELL ID menu. Use the Scroll Up/Down button to select the desired CELL ID
ranging from 0 to 65535 then press the OK button to set. Factory default is 0.
TS ID
– Use the Scroll Up/Down button to select TS ID. Press the OK button to enter the
TS ID menu. Use the Scroll Up/Down button to select the desired Stream ID ranging
from 0 to 65535 then press the OK button to set.
Network ID
– Use the Scroll Up/Down button to select Network ID. Press the OK button
to enter the Network ID menu. Use the Scroll Up/Down button to select the desired
Network ID ranging from 0 to 65535 then press the OK button to set.
ORG Network ID
– Use the Scroll Up/Down button to select ORG Network ID. Press
the OK button to enter the ORG Network ID menu. Use the Scroll Up/Down button to
select the desired ID ranging from 0 to 65535 then press the OK button to set.
Network Name
– Use the Scroll Up/Down button to select Network Name. Press the OK
button to enter the Network Name menu. Use the Scroll Up/Down button to select the
first character for the desired Network Name then press the OK button to set. Repeat the
process for each character in the desired Network Name. A Network Name can consist up
to 16 characters.
Back to Main
- Select Back to Main to escape the RF Setup Menu.
Encoder Setup Menu
Select Encoder –
Press the OK button to enter the Select Encoder menu. Use the Scroll
Up/Down button to Select the section of the Encoder. Select 1 to 4 encoder.
Video Format
–
Use the Scroll Up/Down button to select Video Format. Press the
OK button to enter the Video Format menu. Use the Scroll Up/Down button to
select the Video Format option: PAL, NTSC. Factory default: PAL. Press the OK button
to set.
Program Num
-
Use the Scroll Up/Down button to set 1 Program Num (Number).
Press the OK button to enter the Program Num menu. Use the Scroll Up/Down to select
the Program Num ranging from 1 to 65535 then press OK to set.
Channel Name
– Use the Scroll Up/Down button to select Channel Name. Press the OK
button to enter the Channel Name menu. Use the Scroll Up/Down menu to select the first
character of the desired Channel Name then press the OK button to set. Repeat the
process until the Channel Name is completed.
The Channel Name can be 7 characters long. Factory Default: CHANNEL-1,
CHANNEL-2, CHANNEL-3, CHANNEL-4.
PROVIDER NAME
– Use the Scroll Up/Down button to select Provider Name. Press
the OK button to enter the Provider Name menu. Use the Scroll Up/Down menu to select
the first character of the desired Provider Name then press the OK button to set. Repeat
the process until the Provider Name is completed. The Provider Name can be 16
characters long.
