- 10 -
FDM-4000i Manual V1.0
Step 3: Common Setup Tab
Common Setup
Use the Common Setup Page to set the Output channel, Attenuation, LCN Mode, and Device Address.
Step 4: Local Save
Once all parameters are set you are
required
to do a
Local Save
.
Notes on Changes:
Changes made to an individual setup tab may require the installer to perform a Local Save
AND
Upload and Reboot to the device if only making changes to one parameter of the
encoder.
Example:
Installer is required to change only the output channel for the device (No other
changes to the device are required). Once the channel has been changed, the installer is
required to perform
1: Local Save
AND
2:
Upload and Reboot.
