- 11 -
FDM-4000i Manual V1.0
Step 5: RF Setup
RF Setup
Use the RF Setup Page to setup RF Output.
Select
and set
the required parameters you require for your installation.
*****Installing Multiple Units of FDM-4000i Modulators in an Installation*****
Please ensure each FDM-4000i Modulator has different settings in the categories below
if you are installing 2 or more in an installation.
Output Channel | TS ID | Network ID | Channel Name | LCN
Note:
Failure to change the above settings will result in conflict and will not install all
channels correctly.
Step 6: Local Save
Once all parameters are set you are
required
to do a
Local Save
.
