1.3.3 Tightening torque for screws and bolts with VDA coating
• Applies to threads with VDA coating VDA10, VDA30, VDA42
• Mounting tolerance of +10% of the table values
Friction coefficient µ = 0.10
Size
8.8
10.9
12.9
M4
2,6 Nm
3,9 Nm
4,5 Nm
M5
5,2 Nm
7,6 Nm
8,9 Nm
M6
9,0 Nm
13,2 Nm
15,4 Nm
M8
21,6 Nm
31,8 Nm
37,2 Nm
M10
43 Nm
63 Nm
73 Nm
M12
73 Nm
108 Nm
126 Nm
M14
117 Nm
172 Nm
201 Nm
M16
180 Nm
264 Nm
309 Nm
M18
259 Nm
369 Nm
432 Nm
M20
363 Nm
517 Nm
605 Nm
M22
495 Nm
704 Nm
824 Nm
M24
625 Nm
890 Nm
1041 Nm
M27
915 Nm
1304 Nm
1526 Nm
M30
1246 Nm
1775 Nm
2077 Nm
NOTE:
Detailed information is provided by Service Bulletin 51/2016 or spare parts information no. 63-2016
1.3.4 Tightening requirements for threaded plugs
Tightening torque in accordance with standard MTN 5183-1
GUID-B0BB64D0-94BA-4987-B3B2-25A0BBCE145B-high.jpg [High]
Fig. 9
• Applies to cap screws DIN 908, DIN 910 and DIN 7604A (with short screw-in pin).
• Applies to steel cap screws with phosphated surface protection and oiled or electrogalvanized.
• Thread and contact surfaces under head must be lubricated with engine oil before mounting.
• Mounting tolerance of +10% of the table values
GUID-8E171BBD-CBA2-4502-A8FF-6750263D4788 [V2]
GUID-ABB5D277-EA16-41C0-BB1E-EA7F593F0525 [V2]
1. 00-000 Entire vehicle system
1-30
FENDT 900 Vario S4
X990.005.531.013