Lage:
Engine block
411.201.010.010
NOTE:
Do not re-tighten the cylinder head bolts
During initial setup and after repair work, the
cylinder head bolts are tightened in accordance with
the relevant instruction sheet and must not be re-
tightened.
Position:
Left side of engine, at the front above the
front axle
954.500.410.020
Front lubrication points, see maintenance instruc‐
tions
Position:
On the right at the back on inside of
mudguard
954.500.410.030
Rear lubrication points, see maintenance instruc‐
tions
Position:
Left entrance step
954.810.090.040
Jack points, see maintenance instructions
1. 00-000 Entire vehicle system
FENDT 900 Vario S4
1-19
X990.005.531.013