10
FELTON
5
Tighten the screw inside the
Control Housing and ensure the
screw is aligned with the Plastic
Mounting Tube.
This tightens the lugs on the
inside of the wall. Tighten until
there is no rotation of the
Control Housing.
6
7
Pull the red strip to release
the connector from the plastic
sleeve.
Push the four pin connector
into the socket on the back of
the Control Wheel.
Control Wheel
Data Cable
Summary of Contents for TATE
Page 2: ...2 FELTON...
Page 22: ...22 FELTON...
Page 23: ...23 TATE DIGITAL WALL MOUNTED MIXER INSTALLATION GUIDE...
