Felton TATE, Installation Manual

Page: 8 / 24

8
FELTON
1
CONTROL UNIT INSTALLATION
2
Fig. 2
Tightening lugs
Cutting slot
75mm
Min.
55mm
Wall
Mounting tube
ø 30-32mm
Please note: The Data Cable is 10 metres in length and therefore the Control Unit and Digital
Unit need to be positioned accordingly within this distance. It is recommended that the Data
Cable is installed in conduit for ease of maintenance. The Control Tube can be reduced in
length if required by cutting along the cutting slot (see Fig. 2).
Prepare a Ø30-32mm hole
in the finished wall, deck or
counter/vanity. Position the
drill/hole saw where the
Control Unit is to be located.
Conduit
Data Cable
Cut Position
Drill
Hole
saw
Data Cable must be
installed prior to the
wall lining.
It is recommended
that the Data Cable is
installed in conduit for
ease of maintenance.
*This Control Unit can also be installed as a Wall Mounted unit or a Deck Mounted unit