Spot Inspection and Adjustment
24 Service Manual
■
Front fork
1. Place the motorcycle vertically on a flat and hard
surface.
2. Perform the following spot inspection:
• Inner tube
If there is any external damage or scratch ,
please replace the front fork assembly. Please
refer to Page 83.
If there is any oil leakage, promptly replace the
front fork assembly.
3. Inspect the front fork operation
Press the steering handlebar several times
forcefully to make sure whether the front fork
can be smoothly stretched or retracted. If there
is any abnormal situation, please contact your
local distributor for replacement of the front fork.
Abnormal noises that do not affect using may
occur after a long-time riding, but it is normal.
■
Rear shock absorber
1. Place the motorcycle vertically on a flat and hard
surface.
2. Perform the following spot inspection:
If any oil leakage is found in the rear shock
absorber, promptly replace the rear shock
absorber.
3. Inspect the rear shock absorber's operation
Press the saddle several times to check if the
saddle can rebound smoothly. If rebounding
is abnormal, replace the rear shock absorber
assembly according to the instructions in Page
Summary of Contents for FW-06
