Felo FW-06, Service Manual

Page: 23 / 134

Service Manual 19
4 Spot Inspection and Adjustment
Introduction
This chapter describes the inspection items and adjustment methods required in a regular inspection.
The maintenance measures will enable your motorcycle to always be in good condition, with improved after-sales
service , thus saving maintenance cost.
Maintenance schedule
Every two years
Every year
Every 10,000 km
Every 5,000 km
After 1,000 km
Items Inspection
before riding
▲ Check brake discs ○ ● ● ● ●
▲ Check front wheel brake pads ○ ● ● ● ●
▲ Check rear wheel brake pads ○ ● ● ● ●
▲ Check the brake fluid level of the front wheel brake ○ ● ● ●
▲ Check the brake fluid level of the rear wheel brake ○ ● ● ●
▲ Check if the brake pipeline is damaged ○ ● ● ● ●
▲ Check the bearing clearance of the steering head ○ ● ● ● ●
▲ Check steering column bearing lubrication ○ ● ● ● ●
▲ Check the state of tires I ○ ● ● ● ●
▲ Check the tire pressure I ○ ● ● ● ●
▲ Check if the front and rear shock absorbers leak I ○ ● ● ● ●
▲ Check if the lights, signals and switches
work normally
I ○ ● ● ● ●
▲ Replace gear oil ○ ● ● ●
▲ Check if the side stand screw is loose ○ ● ● ● ●
▲ Check the belt and replace it if necessary* I ● ● ●
▲ Check if the wheel bearing is loose or damaged ○ ● ● ● ●
▲ Check parts and cables I ○ ● ● ● ●
Check the motorcycle frame ● ●
Check the rocker arm ● ●
Check if nuts, bolts and fasteners are loose ○ ● ● ● ●
Check if rubber parts are damaged ○ ● ● ● ●
▲ Check if the rocker arm bearings can rotate
smoothly, and whether they are damaged
○ ● ● ● ●
Lubricate all moving parts and check their
movement
○ ● ● ● ●
▲ Check if the motor pulley and gearbox pulley
are damaged*
○ ● ● ● ●
▲ Check if the overall wiring harness is damaged ○ ● ● ● ●
▲ Replace the brake fluid of the front wheel brake ●
▲ Replace the brake fluid of the rear wheel brake ●
▲:Work that must be performed
○ : One-time cycle
● : Periodic cycle
I : Inspection is required (when necessary, cleaning, adjustment, lubrication or replacement should be done).
* : When replacing the belt, you need to replace the motor pulley and gearbox pulley, and vice versa, to avoid similar damage from
occurring.