![background image](http://html1.mh-extra.com/html/fellowes/callisto-a3/callisto-a3_instructions-manual_3975724004.webp)
4
CAPABILITIES
- Plug the machine into an easily accessible socket.
- To prevent electrical shock - do not use the appliance close to water, do not spill water on to the appliance, power cord or wall socket.
DO
ensure the machine is on a stable surface.
DO
test laminate scrap sheets and set the machine before final laminations.
DO
remove staples and other metal articles prior to laminating.
DO
keep the machine away from heat and water sources.
DO
turn off the machine after each use.
DO
unplug the machine when not in use for an extended period.
DO
use pouches designed for use at the appropriate settings.
DO
keep away from pets, while in use.
DO
ensure self-adhesive pouches are only used with the cold setting.
DO NOT
leave the power cord in contact with hot surfaces.
DO NOT
leave power cord hanging from cupboards or shelves.
DO NOT
use appliance if the power cord is damaged.
DO NOT
attempt to open or otherwise repair the machine.
DO NOT
exceed the machines quoted performance.
DO NOT
allow children to use this machine without adult supervision.
DO NOT
laminate sharp or metal objects (eg: staples, paper clips).
DO NOT
laminate heat-sensitive documents (eg: tickets, ultrasounds etc) on hot
settings.
DO NOT
laminate with self-adhesive pouches on hot settings.
DO NOT
laminate an empty pouch.
IMPORTANT SAFETY INSTRUCTIONS - KEEP FOR FUTURE USE
LAMINATOR CONTROLS
A
On / off switch
B
Standby button
C
Pouch selection buttons, up & down ( , 75, 100, 125 microns)
D
Reverse button (
)
E
Carry handle
F
Pouch / document entry slot
G
Entry support shelf
H
Pouch / document exit
I
Cooling system vents
‘Safe Start’ function
When switched on, the machine has a default ‘Safe Start’ function which is
set to the cold pouch setting. You may select other hot temperature settings if
required. The machine will warm-up and alert the user when it is ready.
‘Reverse’ function
To remove or re-align a pouch during lamination, press and hold the reverse
button until the pouch is ejected from the entry slot.
‘Hot Swap’ function
The Hot Swap function enables the user to instantly switch between thick and
thin pouch settings without any processing delays.
• For best results, use Fellowes ® brand pouches:
Enhance 80, Impress 100, Capture 125, Enhance 80 - Cold Pouches.
• For self-adhesive (cold pouches) only use the cold setting.
• This machine does not need a carrier to laminate. It is a carrier-free
mechanism.
• Always put the item to be laminated into the appropriate sized pouch.
• Always test laminate with a similar size and thickness before final process.
• Prepare pouch and item for lamination. Place item within pouch centred
and touching the leading sealed edge. Ensure the pouch is not too large for
the item.
• If required, trim excess material from around the item after lamination and
cooling.
• When working with different pouch thickness’ (temperature settings) it is
recommended to first start with the thinnest pouches.
FEATURES & TIPS
Performance
Format
A3 or A4
Entry width
A3 = 318mm
A4 = 240mm
Pouch thickness (min)
75 microns (per side)
Pouch thickness (max)
125 microns (per side)
Warm up time (estimate)
5-6 minutes
Cool down time
60-90 minutes
Lamination speed (+/- 5%)
approx. 30-40cm/min (variable)
Number of rollers
2
Ready indication
Light & beep
Reverse
Yes
Clear Path / Anti-jam engine
Yes
Cold lamination
Yes
Technical Data
Voltage / Frequency / Current(Amps)
A3 = 220-240V AC, 50/60Hz, 2.2A
A4 = 220-240V AC, 50/60Hz, 2.0A
Wattage
A3 = 480 Watts
A4 = 430 Watts
Dimensions (HxWxD)
A3 = 570 x 155 x 108 mm
A4 = 450 x 143 x 108 mm
Net weight
A3 = 2.1 kg
A4 = 1.8 kg
Max document thickness
(laminating capacity)
1 mm