![background image](http://html.mh-extra.com/html/fellowes/a75-a4/a75-a4_instructions-manual_550459002.webp)
LAMINATOR CONTROLS
IMPORTANT SAFETY INSTRUCTIONS - KEEP FOR FUTURE USE
4
ENGLISH
GB
A
On / off switch
B
Ready LED
C
Release lever (
)
D
Pouch / document entry slot
E
Pouch / document exit
F
Power on LED
CAPABILITIES
P
erformance
Format
9.5” / 240mm
Entry width
A4 = 240mm
Pouch thickness (min)
75 microns
Pouch thickness (max)
75 microns
Warm up time (estimate)
3 minutes
Cool down time
60-90 minutes
Lamination speed
approx. 30cm/min
(+/- 5%)
(fixed speed)
Number of rollers
2
Ready indication
Light
Release lever
Yes
Clear Path / Anti-jam engine
Yes
Technical Data
Voltage / Frequency /
Current(Amps)
220-240V AC, 50/60Hz,
1.25A
Wattage
300 Watts
Dimensions (HxWxD)
45mm x 210mm x 345mm
Net weight
3 Kg
Max document thickness
(laminating capacity)
.040” / 1mm
- The machine is for indoor use only. Plug the machine into an easily accessible socket.
- To prevent electrical shock - do not use the appliance close to water, do not spill water on to the appliance, power cord or
wall socket.
DO
ensure the machine is on a stable surface.
DO
test laminate scrap sheets and set the machine before final
laminations.
DO
remove staples and other metal articles prior to laminating.
DO
keep the machine away from heat and water sources.
DO
turn off the machine after each use.
DO
unplug the machine when not in use for an extended period.
DO
use pouches designed for use at the appropriate settings.
DO
keep away from pets, while in use.
DO NOT
leave the power cord in contact with hot surfaces.
DO NOT
leave power cord hanging from cupboards or shelves.
DO NOT
use appliance if the power cord is damaged.
DO NOT
attempt to open or otherwise repair the machine.
DO NOT
exceed the machines quoted performance.
DO NOT
allow children to use this machine without adult
supervision.
DO NOT
laminate sharp or metal objects (eg: staples, paper
clips).
DO NOT
laminate heat-sensitive documents (eg: tickets, ultra-
sounds etc) on hot settings.
DO NOT
laminate with self-adhesive pouches on hot settings.
DO NOT
laminate an empty pouch.
5
FEATURES & TIPS
‘Release’ function
To remove or re-align a pouch during lamina-
tion, activate the release lever located on the
back of the machine. The pouch can only be
removed from the entry slot when the lever
is activated.
Auto Shut Off
After 30 minutes the machine will automati-
cally go in to Auto Shut Off mode. The Power
LED will flash red for 5 minutes and then turn
off. The ready LED will turn off. To continue
using the machine press the ON/OFF switch.
The machine will reset itself.
•
For best results, use Fellowes ® brand pouches:
75 micron.
•
This machine does not need a carrier to laminate. It is a
carrier-free mechanism.
•
Always put the item to be laminated into the appropriate
sized pouch.
•
Always test laminate with a similar size and thickness
before final process.
•
Prepare pouch and item for lamination. Place item
within pouch centred and touching the leading sealed
edge. Ensure the pouch is not too large for the item.
•
If required, trim excess material from around the item
after lamination and cooling.
Auto
Shut
Off
SETTING UP THE LAMINATOR
Ensure the machine is on a stable surface.
Check there is enough clear space (min 50cm) behind the
machine to allow items to pass through freely.
Plug the machine into an easily accessible socket.
HOW TO LAMINATE
Switch the power on (located at the side of the machine).
The red ‘Power on’ lamp will light up. The machine is now
heating up.
When the machine is ready, the green ‘Ready’ lamp will
remain on.
Place the document into the open pouch. Ensure the
document is centred against the sealed edge. Use the
appropriate pouch size for the document.
Ensure the pouch enters the machine sealed edge first.
Keep the pouch straight and central within the slot, not on
an angle. Use the entry markings as a guide.
Upon exit, the laminated pouch may be hot and soft. To
prevent jamming remove the pouch immediately. Place
pouch on to a flat surface to cool. Take care when handling
a hot pouch.
To release a pouch during lamination, activate the release
lever located on the back of the machine. Gently pull pouch
out of machine.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
NEED HELP?
Let our experts help you with a solution.
Customer Service...
www.fellowes.com
Always call Fellowes before contacting your place of purchase, see the rear cover for contact details.
Consider registering your machine at www.fellowes.com/register to receive updates and additional information.
LAMINATOR CONTROLS
QUICK START GUIDE
3
A4
A5
A6
A6
A5
A4
Insert Sealed
Edge First
READ
Y
POWER
A4
A6
4R
A6
4R
A4
D
E
C
A
READY
POWER
Insert Sealed
Edge First
A6
A5
A4
A6
A5
A4
1
50cm
READY
POWER
Insert Sealed
Edge First
A6
A5
A4
A6
A5
A4
2
READ
Y
POW
ER
A5
A4
3
READ
Y
POWE
R
A6
A5
A4
4
READY
POWER
READY
POWER
A6
A5
A4
5
READY
POWER
READY
POWER
A6
A5
A4
6
7
A4
A5
A6
A6
A5
A4
Insert Sealed
Edge First
READ
Y
POWER
A4
A6
4R
A6
4R
A4
8
A4
A5
A6
A6
A5
A4
Insert Sealed
Edge First
READ
Y
POWER
A4
A6
4R
A6
4R
A4
9
A4
A5
A6
A6
A5
A4
Insert Sealed
Edge First
READ
Y
POWER
A4
A6
4R
A6
4R
A4
10
B
F
A75-A4_409646C_25L_111016.indd 3,5
11/11/16 9:21 AM