![background image](http://html1.mh-extra.com/html/fellow/corvo-ekg/corvo-ekg_safety-and-maintenance_3939921004.webp)
7
6
• To protect against fire, electric shock, and injury to persons, do not
immerse cord, plug, or any other part of the kettle or base in water
or other liquid.
• No part of Corvo EKG is dishwasher safe. Do not put Corvo EKG or
any parts of Corvo EKG in the dishwasher.
• Never leave Corvo EKG unattended while in use or in Hold mode.
• Close supervision is necessary when any appliance is used by or near
children. Do not use it within a child’s reach.
• This appliance is not intended for use by persons (including children)
with reduced physical, sensory, or mental capabilities, or lack of
experience and knowledge.
• Children should be supervised to ensure that they do not play with
the appliance.
• Unplug from outlet when not in use for extended periods of time and
before cleaning.
Warning! TO PREVENT SCALDING:
Never use the kettle without its lid.
Do not remove the lid while the kettle is boiling.
Scalding may occur if the lid is removed during the heating and
brewing process.
Be aware of steam being emitted from the spout or lid especially
during refilling.
Water can remain hot for a long time after boiling and can present a
scalding hazard. Keep the kettle and the kettle base away from the
edge of the work surface and out of the reach of children. Do not
remove the lid until the kettle cools down.
WARNING: Do not fill above the Maximum Fill Point as displayed
in the diagram below.
If the kettle is overfilled, hot water may be expelled, increasing the risk
for scalding. See Diagram B, below, for reference. We suggest using
only the amount of water you need to conserve water and energy.
WARNING: Do not operate dry or below the Minimum Fill Point.
Corvo EKG must have a minimum of 333 ml/11 fL oz to function. Dry
boiling the kettle may result in permanent damage to the kettle and
potential fire. The Minimum Fill Point is 1 inch (2.54 cm) above the floor
of the kettle. See Diagram B, above, for reference.
Diagram B: Fill Points
Maximum
Fill Point
Minimum
Fill Point
IMPORTANT SAFEGUARDS
CONTINUED