11
10
GROUNDED PLUG
This appliance has a grounded, three-prong plug and must be grounded
with a three-prong outlet when in use. To ensure protection against risk
of electric shock or fire, connect to properly grounded outlets only. Do
not attempt to bypass this safety feature.
DO NOT HEAT AN EMPTY KETTLE
The concealed heating element in the bottom of the kettle body is
protected by an automatic safety device. If your kettle is accidentally
heated without being filled or is allowed to boil dry, it will automatically
cool down and then turn off. If this happens, unplug the kettle, fill with
cold water, and wait a few minutes before replacing it on the base and
plugging in.
SAVE THESE INSTRUCTIONS
INITIAL USE
CLEANING – FIRST TIME USE
1. Place Corvo EKG's base and kettle on a flat, level surface.
2. Remove kettle from the base and remove the lid to add water.
(Do not remove the lid if the lid is hot.)
3. Rinse the interior of the kettle, then add water to the kettle until
approximately halfway full (between the Minimum Fill Point and
Maximum Fill Point in Diagram B).
4. After adding water, insert lid and ensure spout is not close to
and/or facing a wall or cabinet.
5. Following the safety guidelines, plug the power-supply cord into
wall outlet.
6. Set Goal temperature (see High Altitude Chart) to boil water.
7. Once Goal temperature (see High Altitude Chart) is reached, continue
to boil water for approximately one minute. Turn off the kettle with a
quick press of the dial. The LCD screen will turn black.
8. Discard the water inside the kettle. This water should not be
consumed. Your Corvo EKG is now ready to use.
Diagram C: Initial Use
