TOP VIEW
0
12
2
4
8
4
0
12
8
8
4
SIDE VIEW
12
UNIT:m
1
1
0
°
Choose a Location
Before mounting the SmartGuard, please consider and
select a location for the unit based on the coverage
angles as shown on the right and the following conditions:
z
For the best results, fix the unit on a solid surface,
2~2.5m above the ground.
z
Avoid aiming the unit at pools, heating vents, air
conditioners or objects which may change
temperature rapidly.
z
Do not allow sunlight to fall directly on the front of
unit.
z
Try to avoid pointing the unit at trees or shrubs or
where the motion of pets may be detected.
z
Prior to mounting the unit, remember to position the
motion sensor so that a moving object cuts “across”
its beams, not directly towards them. (FIG. 3a, p.10).
Install a wall switch adjacent to the power source (FIG. 3b). This will help you operate
SmartGuard with ease.
10
Wire SmartGuard
z
Switch off the power source or wall switch.
z
Align the mounting straps to the junction box with
the holes. Secure with mounting screws.
z
Twist the junction box wires with fixture wires
together as shown below. Secure with provided
wire nuts.
z
Align the mounting holes to the mounting
straps, secure with two provided screws.
z
Switch on the power source or wall switch.
11
IMPORTANT
Some local building codes may require installation of this product by a qualified
electrician.
Check your local codes as they apply to your situation. If the house wiring is of
aluminum, consult with an electrician about proper wiring methods.
Maintenance or repairing work such as replacing current fuse shall be done by a
qualified electrician or technician.
Before proceeding with the installation, TURN OFF THE POWER TO THE
LIGHTING CIRCUIT AT THE CIRCUIT BREAKER OR FUSE BOX TO AVOID
ELECTRICAL SHOCK.
CAUTION
:
THIS EQUIPMENT MUST NOT BE MOUNTED ON AN OUTLET BOX
WHICH IS SUPPORTED BY A BAR HANGER or equivalent (NE PAS
MONTER CET ÉQUIPEMENT SUR UNE BOÎTE DE SORTIE FIXÉE À UNE
BARRE DE SUSPENSION or equivalent).
MORE SENSITIVE
SENSOR
LESS SENSITIVE
SENSOR
SENSITIVITY TO MOTION
FIG. 3a
Yellow/Green to
Yellow/Green (earth)
Wire Nuts
Blue to Blue (neutral)
Brown to Brown (live)
Mounting Straps
Junction Box
FIG. 3b
N
L
WALL
SWITCH
AC
POWER
