FEISHEN FAAT6000, Owner'S Manual, Page: 72 / 116

·
The CVT housing must be securely in place during operation.
Failure to comply with this warning can result in severe injury or death.
Low Range Use May Reduce CVT
Operating Temperatures
The basic operation of the CVT system is dependent on engine speed and vehicle
torque requirements. As engine speed increased, the force exerted on the movable
drive sheave by the fly-weights also increases. This, in turn, increases the amount of
“pinch” applied to the drive belt. Similarly, if the engine speed decreases, the amount
of centrifugal; force decreases, reducing the amount of belt “pinch”.
CVT System
On this ATV, the approximate gear ratio difference between high and low range is
1:2.05. This difference in gearing affects the operation of the CVT, especially at
speeds less than 7 MPH, due to the system’s dependence on engine speed.
By switching to low range while operating at low ground speeds, the air temperature
in the clutch will be reduced. Reducing the temperature inside the clutch cover
extends the life of the CVT components (belt, cover, etc.)
Adjust the center distance of the CVT:
1. Remove crankcase filter cover, cover protector and crankcase cover.
2. Loosen the left link bolts
③
, right link bolts
②
and engine mounting bolts
①
.
3. Adjust the supporting bolt and measure the size L,D.
4. Tighten the engine mounting bolts
①
, right link bolts
②
and left link bolts
③
.
5. Install crankcase filter cover, cover protector and crankcase cover.