FEISHEN FAAT6000, Owner'S Manual, Page: 5 / 116

AN ATV CAN BE HAZARDOUS TO OPERATE. An ATV handles differently
from other vehicles including motorcycles and cars. A collision rollover can occur
quickly, even during routine maneuvers such as turning and driving on hills or over
obstacles, if you fail to take proper precautions.
SERIOUS INJURY OR DEATH
can result if you do not follow
these instructions.
·
Read this manual and all labels carefully and follow the operating procedures
described.
·
Never operate an ATV without proper instruction. Take a training course. Beginners
should receive training from a certified instructor. Contact an authorized ATV dealer
to find out about the training courses nearest you.
·
Never allow anyone who is not an adult to operate this ATV.
·
Never permit a guest to operate this ATV unless the guest has read this manual and
all product labels and has completed a certified training course.
·
Always avoid operating an ATV on any paved surfaces, including sidewalks,
driveways, parking lots and streets.
·
Never operate an ATV without wearing an approved helmet that fits properly. You
should also wear eye protection (goggles or face shield), gloves, boots, a long-sleeved
shirt or jacket, and long pants.
·
Never consume alcohol or drugs before or while operating this ATV.
·
Never operate at excessive speeds. Always travel at a speed which is proper for the
terrain, visibility and operating conditions, and your experience.
·
Never attempt wheelies, jumps or other stunts.
·
Always inspect your ATV each time you use it to make sure it is in safe operating
condition, always follow the inspection and maintenance procedures and schedules
described in this manual.
·
Always keep both hands on the handlebars and both feet on the footrests of the ATV
during operation
.
·
Always go slowly and be extra careful when operating on unfamiliar terrain. Always
be alert to changing terrain conditions when operating the ATV.
·
Never operate on excessively rough, slippery or loose terrain.
·
Always follow proper procedures for turning as described in this manual. Practice