
On some models, there is a “side window”, the fluid level can be seen through it, and
should be maintained between the indicated “max” and “min” marks on the reservoir.
Automatic Transmission Gear Selector Operation
The transmission gear selector is located
on the right side of the vehicle. The
transmission selector lever has four
positions: high forward, reverse, neutral,
and low forward.
NOTE: To extend belt life, use low
forward gear in heavy pulling situations and in situations when you are
operating below 7 mph (11 km/h) for extended periods of time.
CAUTION
To change gears, stop the vehicle, and with the engine idling, move the lever to the
desired gear. Shifting gears with the engine speed above idle or while the vehicle is
moving could cause transmission damage.
Always place the transmission in gear with the parking brake locked whenever the
vehicle is left unattended.
Maintaining shift linkage adjustment is important to assure proper transmission
function. Should you experience any shifting problem see your dealer.
WARNING
POTENTIAL HAZARD
Engaging a lower gear when the engine speed is too high.
WHAT CAN HAPPEN
Summary of Contents for FAAT6000
