FEISHEN FAAT6000, Owner'S Manual, Page: 105 / 116

NOTE: If warning labels are damaged, contact your dealer for replacement.
Waxing
Your ATV can be waxed with any non-abrasive automotive paste wax. Avoid the use
of harsh cleaners since they can scratch the body finish.
CAUTION
Certain products, including insect repellants and chemicals, will damage plastic
surfaces. Care must be taken when using these products.
Storage Tips
CAUTION
Do not start the engine during the storage period. This will disturb the protective film
created by fogging.
Cleaning
—Clean the ATV thoroughly.
Fuel
—Turn the fuel valve to “OFF” and drain the carburetor bowl completely.
Oil Add and Filter Change
—Warm the engine and change oil and filter.
Air Filter/Air Box
—Inspect and clean or replace the pre-cleaner and air filter. Clean
the air box and drain the sediment tube.
Inspect All Fluid Levels
—Inspect the following fluid levels and change if necessary:
transmission, brake fluid (change every two years or as required if fluid looks dark or
contaminated).
Fog the Engine
—Spray light oil into the cylinder through the spark plug hole.
Check and Lubricate Cables/Grease
—Inspect all cables and lubricate.